Description
The OLS2-Dual laser source is a cost-effective, rugged, handheld instrument designed for performing insertion loss measurements on single-mode fiber optic links when used with an optical power meter. When paired with an optical fiber identifier, the OLS2-Dual may be used for fiber identification. The laser output is stabilized to ensure accurate test results per current TIA/EIA requirements.
The OLS2-Dual features 1310nm and 1550nm (or 1550nm and 1625nm) LASER output from a single output port and is easy to operate. This light source offers 4 modes of operation: Dual wavelengths sending ID, single wavelength sending ID, CW, and modulated Tone. [Active Output], [Tone], [Battery], and [External Power] indicators identify the currently enabled operating mode, battery charge status, and external power presence.
In addition to being powered by two AA alkaline batteries, the OLS2-Dual can be powered by optional AC adapter and/or rechargeable NiMH battery pack.
The OLS4 is fully N.I.S.T. traceable.
The OLS4 is fully N.I.S.T. traceable.
Key Features
Rugged, handheld, lightweight
Dual wavelengths from a single port
Certify single-mode links per TIA/EIA standards
AA alkaline, optional rechargeable NiMH battery pack or AC adapter
270 Hz, 330 Hz, 1 kHz, and 2 kHz supported Tone (2 kHz default)
Dual Wave ID, single Wave ID, CW, and modulated Tone
Long battery life
Low battery indicator
Adjustable output
Cost-effective, easy to use
N.I.S.T. Traceable
Dual wavelengths from a single port
Certify single-mode links per TIA/EIA standards
AA alkaline, optional rechargeable NiMH battery pack or AC adapter
270 Hz, 330 Hz, 1 kHz, and 2 kHz supported Tone (2 kHz default)
Dual Wave ID, single Wave ID, CW, and modulated Tone
Long battery life
Low battery indicator
Adjustable output
Cost-effective, easy to use
N.I.S.T. Traceable
Applications
The OLS2-Dual may be substituted for terminal equipment in the central offi ce or head- end to provide a stable output for loss measurements.
For single-mode applications, such as Telecom or CATV, the OLS2-Dual may be coupled with an optical power meter as a test kit to perform optical loss tests at 1310 and 1550nm.
In the modulation Tone mode, the OLS2-Dual generates a Tone signal into the fiber. This signal is detected by the OFI-200, optical fiber identifier, to isolate specific fibers in a bundle prior to splicing or rerouting.
For single-mode applications, such as Telecom or CATV, the OLS2-Dual may be coupled with an optical power meter as a test kit to perform optical loss tests at 1310 and 1550nm.
In the modulation Tone mode, the OLS2-Dual generates a Tone signal into the fiber. This signal is detected by the OFI-200, optical fiber identifier, to isolate specific fibers in a bundle prior to splicing or rerouting.
Specifications
Optical DLS2-Dual(single port)
Output wavelength(nm) 1310 ±20, 1550±20
Output power 0 dBm
Laser classification Class 1 (FDA 21 CFR 1040.10 and 1040.11, and IEC 60825-1)
Output Power >SC,FC, ST are all available
Stability ± 0.05 dB over 1 hour (after 15 min. warm-up)
± 0.1 dB over 8 hours (after 15 min. warm-up)
Spectral width(FWHM) 5nm (max)
General
Power 2 x AA batteries, optional AC adapter
Battery life (2 x AA) Typical 120 hours, Minimum 75 hours
Operating temperature -10 to 50°C, 90% RH (non-condensing)
Storage temperature -30 to 60°C, 90% RH (non-condensing)
Size (H x W x D) 14.0 x 8.1 x 3.8 cm (5.5 x 3.2 x 1.5 in)
Weight 0.29 kg (0.65 lb)
Output wavelength(nm) 1310 ±20, 1550±20
Output power 0 dBm
Laser classification Class 1 (FDA 21 CFR 1040.10 and 1040.11, and IEC 60825-1)
Output Power >SC,FC, ST are all available
Stability ± 0.05 dB over 1 hour (after 15 min. warm-up)
± 0.1 dB over 8 hours (after 15 min. warm-up)
Spectral width(FWHM) 5nm (max)
General
Power 2 x AA batteries, optional AC adapter
Battery life (2 x AA) Typical 120 hours, Minimum 75 hours
Operating temperature -10 to 50°C, 90% RH (non-condensing)
Storage temperature -30 to 60°C, 90% RH (non-condensing)
Size (H x W x D) 14.0 x 8.1 x 3.8 cm (5.5 x 3.2 x 1.5 in)
Weight 0.29 kg (0.65 lb)
没有评论:
发表评论