Brief Introduction of Fiber Optical Auttenuator

Fiber Optical Attenuator is used an electronic device often reduce the level of performance of an optical signal in a fiber optic communication system. In the optical fiber is also known as transmission loss attenuation. Attenuation is an important element in order to limit the transmission of a digital signal, at large distances. An optical attenuator reduces this optical signal as it propagates along a free space or an optical fiber.

There are three basic types of fiber optical attenuator, fixed attenuators reduce light signals through certain amount with negligible or no reflection. Because signal reflection is not an issue, fixed attenuators for precise data transmission becomes known. Above a certain temperature, size and height Fixed attenuators are often used in order to improve inter-stage matching circuit in an electronic circuit. Thorlab fixed attenuators are dB from 5 dB to 25. Mini-Circuits’ fixed attenuators are packaged in robust plug-in and plug models. They are available in both 50 – and 76-ohm models spanning from 1to 40 dB DC to 1500 MHz.

Optical variable attenuator is a double window (1310/1550nm) of passive components. The variable optical attenuator could continually and variably attenuate the light intensity in the optical fiber transmission. Variable fiber optic attenuator could help simulate distance or actual attenuation in the fiber optic testing work by inserting a calibrated attenuation into the link.

In the variable optical attenuator, resistors, which replaced with electronic devices, such as the metal-semiconductor field-effect transistor and PIN diodes. Variable Optical Attenuator light signal or beam in a controlled manner, thereby producing an output optical beam with different attenuated intensity. The attenuator is the power ratio between the light beam from the device and the light beam in the device for a variable rate. Variable optical attenuators are typically used in fiber optic communication systems to regulate optical power to damage in optical receivers, which can be prevented by irregular or fluctuating power levels. The price of commercial veriable optical attenuator depends on the production technology used ever.

FiberStore is a online shop supply Fiber Optic Attenuator FC, SC/APC, ST, PC, LC, UPC, MU, FC/APC, SC, LC/APC, fixed value plug type fiber optic attenuators with different attenuation level, from 1dB to 30dB. You can buy fiber optic connection products on our store with your confidence. All of fiber optics supplies with high quality but low price.

Source: FiberStore.com

Fibre Optic Stainless Steel 288 Core Outdoor Cable Distribution Box FiberStore Supplies

Fibre Optic Stainless Steel 288 Core Outdoor Cable Distribution Box

 

Description

This product is designed for the connection between the Optical fiber cable and the main points, and it is a kind of port device. It has the function of direct or indirect connection, coiling, storage, and dispatching on the fiber cable.

Key Features

Stainless steel materials with electrostatic powder coating, corrosion-resistant and anti-aging properties
Fusion and distribution integration module design, 12 core per mudule, make a big capacity
Easily frontal operation
Function include: distribution, bonding, storage, adjust, etc.
Sealing performance meets the IP65-level requirements of GB4208 standard, suitable for outdoor distribution
Cabinet with high base,big space which is easy for the cable entry, easy and convenient to install. Safely grounding
Optical cables, wire jumper and storage unit are all separately. Clear mark for bonding and distribution
FC or SC adapter are installed 40 degree dip angle which prevents eyes from arc light and also convenient for ribbon and non-ribbon optical fibers fixing
Radius of curvature for optical fiber ≥30mm
Hanging or flooring installationnstalled by the fusion module

Specificatios

Large capacity
High Density
Good corrosion resistance
Ageing resistance performance
Good sealing performance
1450*750*330MM

Technical Parameters

Nominal work wave-length:850nm, 1310nm, 1550nm
Operating temperature:-5°C-+40°C
Storage temperature:-40°C +70°C
Relative humidity:≤85%(+30°C)
Atmospheric pressure:70~106 KPa
Insertion loss:≤0.2dB
Return loss:≥45dB (PC), ≥50dB(UPC), ≥60dB(APC)
Isolation resistance: ≥1000MΩ/500V(DC)
Durability: 1000 times
Anti-voltage strength: ≥3000V(DC)/1min

This product belong to FiberStore of Cross Connect Cabinet, we also supply 96/144/576 Core Outdoor Cable Distribution Box and so on.

10GBase-SR X2 is One of The 10G X2 FiberStore Supplies

X2 transceiver is the 10G fiber transceiver, its development was based on former XENPAK standards, X2 10Gb transceiver inner function is almost similar with XENPAK, and X2 also can use one transceiver to fulfill all 10G Ethernet optical port function. X2 transceiver is about half size of XENPAK, this enable it suit for density installations.

X2 transceiver is a hot pluggable in the Z-direction module that is usable in typical router line card applications, Storage, IP network and LAN and compliant to X2 MSA.10GBase-SR X2 is high performance, cost effective X2 transceiver like SFP plus module supporting 300M transmission distance in the 10GBASE-SR/SW Ethernet, also, it is a fully integrated 10.3Gbit/s optical transceiver module that consists of a 10.3Gbit/s optical transmitter and receiver, XAUI interface, Mux and Demux with clock and data recovery(CDR). This 10GBase-SR version of X2 transceiver line uses an 850nm Vcsel Laser Diode to achieve 300m over 50/125 multi-mode fiber as 10GBASE-SR of the IEEE 802.3ae like the XENPAK 10G SR, it is Full duplex transmission mode, management and control via MDIO, also DOM(Digital Optics Monitoring) Support inside. The operating case temperature is 0 to 70°C as usual as the normal SFP transceiver. Sure it is RoHS 6/6 compliant and compliant with product safety standards.

FiberStore can provide 10G XFP, 10G BIDI XFP, CWDM XFP, DWDM XFP with competitive price and high quality, which are fully compatible with equipment from other suppliers such as Cisco , Juniper and so on.

Source: FiberStore.com

Buy High Quality Fiber Optic Light Source From FiberStore

Fiber optic light source is a fiber optic test equipment to measure the fibre optical loss for both single mode fiber cable and multimode fiber cables; usually the optical light source is used with the fiber optic power meters. This fiber optical visual light source can provide wavelength output according to the specific requirements including the 650nm red source, 1310nm/1550nm wavelength for the single mode fiber and 850nm/1300nm wavelength for the multimode fiber. Used together with our fiber optic power meter, they act as an economic and efficient solution for the fiber optic network works.

Handheld, 1~6 wavelengths, 650/850/1300/1310/1490/1550/1625nm, 0~-20dBm output power, LCD display, FC adaptor (other type available).

Optical Laser Source is a handheld optical light source, newly released in 2007. It can provide1~6 wavelengths output to satisfy specific requirements including the 650nm visible light source and the 1310/1550nm wavelengths for single mode fiber or the 850/1300nm wavelengths for multimode fiber, as well as other wavelengths according to customer’s needs. Together with the optical power meter, it is a perfect solution for fiber optic network applications.

Features:

1. Provides 1~6 wavelengths output which can be optional according to customers’ needs
2. CW, 2Hz modulation output at 650nm, and CW, 270Hz,1KHz,2KHz
3. High stability of the output power
4. Stable output wavelength
5. Backlight LCD display supports night operation
6. Low battery power indication

Standard Packages

OLS3111 Optical Light Source, 3pcs 1.5V batteries, AC Adaptor, User Manual, Cotton swabs and Soft carrying case.

Application:
1. Maintenance in Telecom Maintenance
2. CATV
3. Fiber Optic Lab Testing
4. Other Fiber Optic Measurements

Buy Plastic ABS box PLC Splitter From FiberStore

Fiber optic PLC Splitter come with plastic ABS box package features high performance and best price. PLC Splitters inculding 1*N PLC splitter module and 2*N PLC splitter module .The common configurations are 1x4, 1x8, 1x16, 1x32 and 1x64 PLC Splitters;but 2x4, 2x8, 2x16, 2x32 configurations are also available. Plastic ABS box package PLC Splitter has small compact and good flexibility. The PLC Splitter with unterminated ends can be fused by customers themselves.

1x4 Fiber PLC Splitter Description

1x4 PLC splitter, 2.0mm fiber, body size 100mm x80mm x10mm, 1260~1650nm, 1m fiber optic pigtail length, with connector (FC/PC, FC/APC, SC/PC, SC/APC, LC/PC, LC/APC,etc) or without connector.

Key Features

Good uniformity and low insertion loss
Low Polarization Dependent Loss
Excellent Environmental Stability
Excellent Mechanical
Stability Telecordia GR-1221 and GR-1209
Components through TLC-Certified,Conform to YD1117-2001

Applications

Fiber to The Point (FTTX)
Fiber to The Home (FTTH)
Passive optical networks(PON, GEPON)
Local Area Networks (LAN)
Cable Television (CATV)
Test Equipment

2x4 Fiber PLC Splitter Description

2x4 PLC splitter, SMF-28e 2.0mm fiber, body size 100mm x80mm x10mm, 1260~1650nm, 1m fiber optic pigtail length, with connector (FC/PC, FC/APC, SC/PC, SC/APC, LC/PC, LC/APC,etc) or without connector.

Key Features

Good uniformity and low insertion loss
Low Polarization Dependent Loss
Excellent Environmental Stability
Excellent Mechanical
Stability Telecordia GR-1221 and GR-1209
Components through TLC-Certified,Conform to YD1117-2001

Applications

Fiber to The Point (FTTX)
Fiber to The Home (FTTH)
Passive optical networks(PON, GEPON)
Local Area Networks (LAN)
Cable Television (CATV)
Test Equipment

Want to know more Plastic ABS box PLC Splitter products information please visit our web site. FiberStore also supplies 1U Rack PLC Splitter, LGX box PLC Splitter and so on.

Fiber Optic Fault Locator

Fiber visual fault locator(VFL) is a kind of device which is able to locate the breakpoint, bending or cracking of the fiber glass. It can also locate the fault of OTDR dead zone and make fiber identification from one end to the other end. Designed with a FC,SC,ST universal adapter, this fiber fault locator is used without any other type of additional adapters, it can locates fault up to 10km in fiber cable, with compact in size, light in weight, red laser output.
handheld, single wavelength, SM/MM, 650±10nm, Output Power: 1/3/5/10mW, FC adaptor, standard accessories.
Visual Fault Locator VFL-105P Features:
Operates either in CW or Pulsed
Constant output power
Lower Battery warning
Long battery life (up to 60 hours)
Crash-proof and dust-proof design for laser head
Laser case ground design prevents ESD damage
Burning testing to ensure the reliability
Portable and rugged, easy to use
2.5mm universal connector, for 1.25mm connectors
FC (Male)-LC (Female) convertor can be provided on requests
Guarantee to CE standards include EMC,EMI, ROHS
Visual Fault Locator VFL-105P Applications:
Maintenance in telecom
Maintenance CATV
Test Lab of optical fibers
Other fiber optic measurements
FiberStore supplies all kinds of fiber optic tester, if you want to know more fiber optic products, please visit our web site.

Buy Mini Telephone Line Tester From FiberStore

Telephone Line Tester is a new kind of line fault tester with safety & multi-functions capabilities. Besides the functions as a common Tel Line Tester, it also has the functions of high voltage protection and dangerous voltage warning.A phone line tester is used for detecting either digital or analog phone systems as well as the line polarity. Telephone line testers are good for both personal and professional use.

ST220 Tel Line Tester is a new kind of line fault tester with safety & multi-functions capabilities. Besides the functions as a common Tel Line Tester, it also has the functions of high voltage protection and dangerous voltage warning, etc.

Main Functions
Dialing, talk, hook
Checking wire pairs
Test insulation or break faults of the line
Pulse/Tone switch

Key Features
DTMF applying to GB/T15279-94
High voltage alarm
Low voltage warning
Last number redial
Special durable test clamp
Automatic power off and energy-save design
Pocket size, simple operation

Technical Specifications
Insulation impedance test
Range (MΩ)0~10
General specifications
Ring distance (Km)≤ 1
Line break resolution (Km)≤ 3
Weight (kg)≤ 0.22
Dimension (mm) 146× 54× 37
Battery (V)9

FiberStore.com is a worldwide leading manufacturer & supplier of fiber optic products. We have been in these business almost 7 years. We have our own factory and our own professional R&D department. We are specializing in supplying fiber optic components and network equipment.

The Difference Between Visual Fault Locator and Fiber Optical Identifier

Are one of the most important tools for testing in our network are Visual Fault Locator and Fiber Optical Identifier. But sometimes we mistake them as the same equipment. To tell the truth, they are different test tools.

1. Visual Fault Locator

Fiber visual fault locator is a kind of device which is able to locate the breakpoint, bending or cracking of the fiber glass. It can also locate the fault of OTDR dead zone and make fiber identification from one end to the other end. Designed with a FC,SC,ST universal adapter, this fiber fault locator is used without any other type of additional adapters, it can locates fault up to 10km in fiber cable, with compact in size, light in weight, red laser output.

This device is based on laser diode visible light source, when the light injected into the fiber, if fiber fracture, connector failure, bending over, poor weld quality failure by launching the light of the fiber to fiber fault visualization positioning.Visual Fault Locator launched a continuous wave (CW) or pulsed mode. The typical frequency of 1Hz or 2Hz, but can also work in the kHz range. Usually the output power of 0dBm (1mW) or less, the working distance of 2 to 5km, and to support all the common connector.

2. Fiber Optical Identifier

Fiber Optical Identifier, it is a very sensitive photodetectors. When you will be a fiber bending, some light radiation from the fiber core. The light will be detected by the fiber identification, technical staff according to these light can be a single fiber in the multi-core optical fiber or patch panel identified from the other fiber out.

Optical Fiber Identifier can detect the status and direction of the light does not affect the transmission. In order to make this work easier, usually at the sending end to the test signal modulated into 270Hz, 1000Hz or 2000Hz and injected into a specific fiber. Most of the optical fiber identifier for the operating wavelength of 1310nm or 1550nm single-mode fiber optical fiber, optical fiber identifier can use the macro bending technology to identify the direction and power of the transmission fiber and the fiber under test online.

Optical fiber identifier is an essential installation and maintenance instrument which can identify the optical fiber by detecting the optical signals transmitted through the cables, during this process the fiber optic identifier do no harm or damage to the fiber cable and it also do not need opening the fiber at the splice point for identification or interrupting the service.

Fiberstore now supply JW3306B Optical Fiber Identifier and AFI400 Optical Fiber Identifier Welcome to our store. Contact us at sales@fiberstore.com

Source: FiberStore.com

The Optical Transceiver of XFP Transceiver

Having photonic and electrical layer normal accordance interfaces are small type component pluggable transceivers. Commercially marketed compact SFP modules are capable to support insofar as 4.25 Gbit/s and together with the previous types are enhanced SFP+ models that are aimed for greater data rates such as 8.5 Gbit/s and 10.52 Gbit/s Fiber Channel.

XFP Transceivers commercially available in the market now include the 10Gbase SR XFP, 10Gbase LR XFP, 10Gbase ER XFP and 10Gbase ZR XFP. These Fiber Transceivers are with Digital Diagnostics that provide a powerful optical management tool. 10Gbase SR XFP is used with OM3 50/125 laser optimized multimode fiber with max working span around 300 meters. The other three standards are all for single mode fiber applications, 10Gbase LR XFP work with 1310nm SMF and max working distance 10km, 10Gbase ER XFP work with 1550nm SMF and working range max 40km, 10Gbase LR XFP is also 1550nm wavelength and working span is 80km max.

The small size of one such interface permits it to take up a comparatively small amount of space along the edge of a network device motherboard, crucial for many transceivers to be hooked up at once. A lesser number of transceivers of the associated GBIC protocol can be joined to a compatible hub at a time, as the interfaces for that kind of transceiver are noticeably larger.

Fiber optic networks are simply an astounding technology. The elegance and efficacy of transferring a signal through lasers reflected off the sides of a microscopic tube are unparalleled. For any of this to operate properly, though, an optical transceiver is a requirement.

Communication being vital for every organization, the advent of technological development has led to a faster and improved mode of communication. The earlier communication devices were crude, which resulted in delayed and expensive processes of transmission.For the ones who are not very well aware of scalability, it would mean the potential or inherent capacity to rise beyond eight channels on one stand. This makes it easier to organize and manage a network.

What is Xenpak transceiver module? Xenpak transceiver module is one of the 10Gbps fiber optic transceiver modules. Xenpak transceiver is fully compatible with the IEEE 802.3ae standards for 10G Ethernet as required by Xenpak MSA. It is same at 121 x 36 x 18 mm (the biggest in 10G fiber transceiver modules); these modules typically weigh less than 300 g and with dual SC fiber interface.

The electronic, mechanical and optical features of these hot-plug devices are laid down by a multisource arrangement between network component dealers. SFP modules are inspired by GBIC interfaces only that they are designed with better port densities.

Source: FiberStore.com

Fiber Optic Tools For Installers

The frequency of problems caused by fiber optic tool is high: their poor design, improper use, poor condition or the unfamiliarity with their use all are sources of problems during installation. Installation tools include some big hardware like bucket trucks, trenchers, cable pullers or plows. The need for these will be established early in the planning stages. Many contractors do not own expensive equipment like this, finding it more cost effective to rent it as needed. If your crews are not familiar with a particular piece of equipment, subbing the work to someone who has both the equipment and an experienced crew may be much more cost effective, as mistakes in their operation can be disastrous – both costly and dangerous.

Outside plant cables and premises singlemode cables will generally require fusion splicing for concatenation of long cable runs and splicing on pigtails for termination. Since fusion splicers have become less costly, more contractors have purchased them. Other contractors who have fewer projects that require splicing prefer to rent them, knowing they are getting a splicer that is a newer model with the latest technology that has been recently serviced. The downside of a rental unit is your installers may not be familiar with that model and require some training or time to familiarize themselves with it. If you own your splicer, it’s assumed your crews are familiar with its operation and need only to inspect the unit to ensure it’s working properly and the arc electrodes are in good condition.

Most contractors own termination equipment for multimode fiber as it is used on most jobs. Generally contractors have a preferred method of termination, either adhesive/polish or prepolished/splice types. Either type requires dedicated toolkits. For epoxy or Hot Melt terminations, the appropriate curing ovens will be required, and the two are quite different; the Hot Melt oven is much hotter and will ruin epoxy connectors if used on them by mistake. If you use epoxy or anaerobic adhesives from your stock, check the expiration dates on all of them to make sure they are fresh. Also check for other consumables like wipes, isopropyl alcohol, cable gel cleaner and of course, connectors.

Prepolished splice connectors have been getting better and easier to use. Newer termination kits include a quality cleaver like those used with fusion splicer and a visual fault locator to verify the internal splice. Since newer kits can now produce connectors that have lower losses, around 0.5 dB, a new kit (and perhaps some training) and the latest connectors could be a good investment.
When checking out the termination kits, pay particular attention to the condition of the tools. Of course missing tools will need replacement, but hopefully that was done when the kits were inspected after the last job. However, jacket strippers, fiber strippers and cleavers can wear out or be damaged, so its important to check their operation with some sample fibers to see if they are working properly.

Let me repeat that thought: It’s mandatory to check out every piece of equipment you intend to take to a job site to ensure its proper operation and let the installation crew reacquaint themselves with its operation. This process needs to be done with enough time to have the unit serviced or replaced and restock any consumable supplies. It should also be obvious that one never puts back on the shelf any equipment that has had problems in the field. It should immediately be replaced or sent out for repair to be ready for the next job or discarded.
Let me caution you on another problem we have seen recently with tools. Several recent complaints of poor quality tools, especially fiber strippers, have led us to believe that poor quality imports are becoming more common. In one case, the tools appear to have been counterfeit, branded with a well-known American name. I suggest you purchase tools only from reputable sources and inspect them on receipt to ensure they work properly.
Finally, as the equipment is checked out and readied for use, make certain that appropriate safety equipment is packed with the tools. Everyone who works with fiber needs safety glasses and clean, unscratched ones will make seeing those hair-thin fibers much easier. Black work mats for splicing and termination also help the installer see the fibers and find fiber scraps for easier cleanup.
Source: FiberStore.com

Integrated Cabling Network Connection Between The Optical Fiber Equipment

Since the optical fiber and fiber optic port prices are still very expensive, so the optical fiber is mainly used for optical fiber is mainly used for the connection between the core switch and the aggregation layer switches, or used in the aggregation layer switches between the cascade. Should be noted that the fiber ports do not have the ability to stack can only be used in cascade.

1. Fiber optic jumper wire cross connection

In all switches are two fiber ports that pitch-catch. Of course, fiber jumpers must be 2, otherwise wouldn’t be able to communicate between the ports. When the switch via fiber optic port cascade must be at both ends of the fiber jumpers transceiver swap, when the a Termination “receive” the other end “send.” Similarly, when one end of the “send” elbow, the other end to close. “ Cisco GBIC fiber module marked transceiver flag, left side inward arrows indicate the “revenue”, the right side of the outward arrows indicate the “send”, the port LED is not lit, the connection failed. Only when the fiber port after the success of the LED light into green.

Similary, when the convergence layer switch is connected to the core switches, between the transceiver ports of the optical fiber must also be cross-connections, as shown:

2. The connection of the optoelectronic transceiver

When the fiber optic cable integrated wiring between buildings or between floors while the horizontal cabling using twisted pair connection between the two transmission media. First, using the same time has a fiber port and RJ-45 port switch, switch between the interconnection between the photoelectric port; using inexpensive photoelectric conversion device, connect one end of the optical fiber, the other end connected to the switch twisted pair ports photoelectric conversion between, as shown:

Comparatively speaking, the higher transmission performance modular switches, photoelectric conversion devices cheaper. Therefore, it should be based on the network data transmission needs determined and the amount of investment which equipment. It needs to be noted that not all fiber transceivers to support full-duplex, some products only support half-duplex, and should therefore pay attention to identify at the time of purchase. In addition, taking into account the compatibility suggested the use of the products of the same brand and type.

One end of the optical transceiver connected to the fiber optic patch panels using fiber optic jumper with the remote fiber-optic interface connection; using twisted pair jumper the other end connected to the RJ-45 port switch, with the other computers on the switch connection to complete the network backbone fiber optic transmission.

Source: FiberStore

Brief introduction of PLC Splitter

Product/Service Details

Planar lightwave circuit (PLC splitter) is a type of optical power management device that is fabricated using silica optical waveguide technology to distribute optical signals from Central Office (CO) to multiple premise locations. It features small size, high reliability, wide operating wavelength range and good channel-to-channel uniformity, and is widely used in PON networks to realize optical signal power splitting as a low-cost solution.

FiberStore.COM provides a all range of 1xN and 2xN plc splitters. They are available in the flexible form of 1U 19” rackmountable box, and come with Fan-out kits and terminated, the type of blockless with terminated or unterminated ends and small plastic ABS box for outdoor use and Standard LGX box plc splitter. Our plc splitter products is guaranteed to high quality and best price. We can customize Planar Lightwave Circuit Splitter (plc splitter) to fit your specific requirements.

Features:

Low Insertion Loss
Low Polarization Dependent Loss
Compact Design
High Reliability and Stability
Good channel-to-channel uniformity
Wide Operating Wavelength:
From 1260nm to 1650nm
Wide Operating Temperature:
From -40°C to 85°C

Quality Compliance:

Telcordia GR-1209-CORE
Telcordia GR-1221-CORE
RoHS

Applications:

FTTX Systems
PON Networks
CATV Links
Optical Signal Distribution

This PLC Splitter belong to FiberStore of Fiber Splitter, and welcome to order save you time and money!

Source: FiberStore

FiberStore For Sale 4U 19" Wall Mount Network Cabinet

FiberStore.com is a worldwide leading manufacturer & supplier of fiber optic products. We have been in these business almost 7 years. We have our own factory and our own professional R&D department. We are specializing in supplying fiber optic components and network equipment.

 

Description

4U 19" 400mm Wall Mount Network Cabinet

Portable wall mount network cabinet 4U to 18U for networking.
Standards - ANSI/EIA RS-310-D, DIN41497 part 1, IEC297-2, DIN41494 part 7, GB/T3047.2-92

Main material:
1. SPCC cold rolled steel;
2. Thickness: mounting rail: 1.5mm, others: 1.2mm
3. Surface finish: Degreasing, pickling, phosphoric, powder coated
4. Loading capacity: 60KG

Features:
1. Welded reliable frame structure
2. Standing or wall mounting installation
3. Feet and castors are optional
4. Easy mounting installation
5. 19" standard installation
6. Lockable perspex door.
7. All cabinets are finished in Goose Grey

Contents:
1. 1 x 4U 400mm Cabinet
2. 1 x Power supply
3. 1 x Fan
4. 1 x Bag of Nuts and Bolts

FiberStore 6U, 9U, 12U, 15U, 18U wall mount network cabinet, and saving your money and time to order!

What is X2 Transceiver

X2 transceiver is the 10G fiber optic transceiver, its development was based on former Xenpak standards, X2 10gb transceiver inner function is almost similar with Xenpak, and X2 also can use one transceiver to fulfill all 10G Ethernet optical port function. X2 transceiver is about half size of Xenpak, this enable it suit for density installations.

X2 Transceiver is a hot pluggable in the Z-direction module that is usable in typical router line card applications, Storage, IP network and LAN and compliant to XENPAK MSA. The XENPAK transceiver is a fully integrated 10.3Gbit/s optical transceiver module that consists of a 10.3Gbit/s optical transmitter and receiver, XAUI interface, Mux and Demux with clock and data recovery(CDR).

10Gbps Ethernet standards were defined by IEEE in 2002, it not only enlarges the data transmission rate, but it has greater working distance. IEEE 802.3ae 10G Ethernet standard defined the working distance from 300 meters to 40km. We supply the X2 10G fiber optic transceivers that are fully compatible with equipment from other suppliers.

Fiberstore X2 Transceiver supports Ethernet and other optical links’ applications across many switching and routing platforms.

Source: FiberStore

What is xenpak transceiver

XENPAK is a Multisource Agreement (MSA), that defines a fiber-optic or wired transceiver module which conforms to the 10 Gigabit Ethernet (10GbE) standard of the Institute of Electrical and Electronics Engineers (IEEE) 802.3 working group.

The XENPAK MSA was publicly announced on March 12, 2001 and the first revision of the document was publicly released on May 7, 2001. The most recent revision of the MSA, Issue 3.0, was published on September 18, 2002. The result covered all physical media dependent (PMD) types defined by the IEEE at that time for 802.3ae 10GbE.

Xenpak is easy to use, one transceiver can take the 10G Ethernet optical ports function, it is one of the first generation 10G fiber transceivers yet it is still used today.

Xenpak transceiver is packed in a 4.8×1.4×0.7 inch package, use DFB laser components, Xenpak working distance via G652 multimode fiber could reach up to 10km, another important components inside the Xenpak is the MUX/DEMUX parts, it consume 50% of the power and result in the bigger size. We supply various kinds of Cisco equivalent Xenpak transceivers, typical types include the Xenpak 10GB SR , with 300 meters working span, Xenpak 10GB LR , with 10km working distance and the 40km Xenpak 10GB ER . They are with good price and excellent compatibility.

Fiberstore XENPAK Transceiver supports Ethernet and other optical links’ applications across many switching and routing platforms.

Source:http://www.fiberstore.com/tutorial.html

FiberStore Supply Optical Fiber Identifier JW3306B In China

Optical fiber identifier is an essential installation and maintenance instrument which can identify the optical fiber by detecting the optical signals transmitted through the cables, during this process the fiber optic identifier do no harm or damage to the fiber cable and it also do not need opening the fiber at the splice point for identification or interrupting the service.

Fiberstore now supply JW3306B Optical Fiber Identifier and AFI400 Optical Fiber Identifier Welcome to our store. JW3306B Optical Fiber Identifier can quickly identify the direction of transmitted fiber and display the relative core power without any damages to the bended fiber. When the traffic is present, the intermittently audible tone is activated.

JW3306B Optical Fiber Identifier Features:

Easy-to-use with “ONE KEY” operation
Efficiently identifies the traffic direction and frequency tone (270Hz, 1KHz, 2KHz) with audible warning.
Displays the relative core power
More accurate test with Sunshade
Easy-to-replace adaptors
Durable metal housing and quality construction
Lower power indication

AFI400 Optical Fiber Identifier Features:

Support to detect optical signals without disrupting traffic
Based on non-destructive technology
Indicate the signal direction in fiber
Detect a variety of optical tones, 270Hz, 1kHz and 2kHz
Suitable for 0.25mm, 0.9mm, 3.0mm fiber, and no need to replace the clamp block, more convenient than others
Build in visible fault locator 1mW or 10mW optional;
Battery low indication;
Powered by 2 units of 1.5V AA alkaline batteries;
One year guarantee