High Quality OTDR FS2405 Supplied in FiberStore

FS2405 series of handheld OTDR is a high performance, cost-effective optical network analysis tester, with the feature of lightweight, easy to use, high intelligence and having a hotkey for automatic rapid testing. FS2405 handhold OTDR is small, powerful and portable. It is battery powered. 3.5 inch TFT-LCD can meet the needs of high luminance environment and night. FS2405OTDR has simple and friendly graphical user interface. Touch screen panel and keyboard button can meet different operator’s habits. Hotkey for rapid testing, and just press the hotkey you can obtain the required operational test results. FS2405 series OTDR provides three power saving modes, Close the LCD screen, equipment sleep and power-off, for users to select according different applications, to ensure that the equipment to achieve a longer working hours.

 

Features

1.1310/1550 dual-wavelength testing
2.Visible light source, facilitate to inspect fiber break
3.Complete PC analysis software for you to quickly and efficiently generate a professional OTDR reports
4.Easy to operate, both the touch-screen panel and keyboard button can completely operate the equipment, meeting different operator's habits
5.All important tests can provide a hotkey to operate automatically, to ensure higher test efficiency
3.5-inch TFT LCD with brightness adjustment support, suit for high luminance environment and night
6.With auto-sleep function to save power
7.NI-MH battery-powered, low-voltage protection, continuous working time up to 8 hours
8.Hardware power switch, thorough stop electrical energy loss, ensures the battery can work longer
9.Determine fiber optic cable or fiber optic's failure point, connection point, breakpoint position
10.Describe fiber optic cable or fiber's loss distribution curve, measure cable, fiber's length and 11.the loss, attenuation coefficient between two points
12.Measure fiber optic cable, optical fiber connector’s insertion loss
13.Measure fiber optic cable, optical fiber’s reflection loss

Applications

Fiber production and research devices
Fiber Network Testing and Maintenance
Optical Communication Teaching and Test

Specification

Source Type: LD
Connector Type: FC (SC, LC)
Wavelength: 1310nm 1550nm
Fiber Type: Single-mode
Weaken Blind Spot: 15m
Event Blind Spot: 8m
Dynamic Range: 26dB
Maximum Test Distance: 80Km
Data Storage Capacity: 180 test curve
Size: 220mm×110mm×70mm

576 Core Floor-mount SMC Fiber Optic Cross Connect Cabinet For Sale In FiberStore

Fiber optic cross connect cabinet is an outdoor optical equipment that is especially designed for outdoor optical nodes in access network.

576 Core Floor-mount SMC Description

 

Key Features

High intensity and anti-erosion performance
Able to counter abrupt climate change and extreme environment
Capacity can be flexibly customized as required
Quick and convenient installation
Built-in direct splice unit is capable for providing direct connection function
Perfect design of fiber wiring routing could facilitate management and maintenance of fibers
With secure and reliable fastening and grounding protection devices for the optic fiber
Applicable to strap-shaped and non-strap shaped fibers

Specificatios

Outdoor optical equipment
Applicable to strap-shaped
SMC, Cold-rolled steel
1450*760*520MM

Technical Parameters

Nominal work wave-length 850nm, 1310nm, 1550nm
Operating temperature -5°C-+40°C
Storage temperature -40°C +70°C
Relative humidity ≤85%(+30°C)
Atmospheric pressure 70~106 KPa
Insertion loss ≤0.2dB
Return loss ≥45dB (PC), ≥50dB(UPC), ≥60dB(APC)
Isolation resistance ≥1000MΩ/500V(DC)
Durability 1000 times
Anti-voltage strength ≥3000V(DC)/1min

NEW 10GB X2 SR MM 850nm 300m Optical Transceiver

Description

 

NEW 10GBase-sr x2 MM 850nm 300m Optical Transceiver

Price: $150.00
Manufacturer: FiberStore
Product Type: X2 transceiver module
Interfaces/Ports: 1 x 10GBase-SR
Interfaces/Ports Details: 1 x SC Duplex Connector 10GBase-SR
Data Transfer Rate: 10 Gbps
Wavelength: 850nm
Transfer Distance: 300m

Applications

10G Ethernet
Metropolitan Area Network
Building Vertical Riser
Inter and Intra Campus
Data Centers
Other Optical Links

Shipment

International Express: Fedex, DHL, UPS, TNT and EMS.If you have another preferred carrier, please notify us in advance.
FedEx Overnight: It will take 1-3 business days (weekends and holidays excepted) for delivery.
DHL: It will take 2-4 business days (weekends and holidays excepted) for delivery. For Spain, Italy, Brazil and some other countries, items will take longer time to arrive due to customs clearance period.
Shipments are usually dispatched within 2 working days after received payment

FiberStore is an professional manufacturer & supplier of transceivers. All of our fiber transceivers are tested in-house prior to shipping to guarantee that they will arrive in perfect physical and working condition. We guarantee transceivers to work in your system and all of our transceivers come with a lifetime advance replacement warranty.

14 Slots Rack Single Power Supply AC 220V 19' 2U Fiber Media Converter

This item is Fiber Media Converter 14 Slots Chassis Single Power 220V 19' 2U

 

Description

The Chassis-based Media Converters include a number of independent media converters and a chassis capable of housing upto 16 media converters. You can start with single media converters,each equipped with its own housing and AC power adapter. When your requirements grow big, you can mount a chassis in your equipment rack and install your media converters in the chassis. The housing of each media converter can be easily removed, and the media converter PC board can be slid into the chassis.

The chassis lets you install multiple media converters in an equipment rack together with the network devices for which they provide media conversion. This provides for space saving, and the cabling will look neat. The chassis comes with its own universal AC to DC power supply. For maximum power availability, an optional redundant power supply is available for installation in chassis.

FiberStore.COM supply two types of rack-mounted chassis for unmanaged media converters : 2-U 14 slots media converter chassis and 2-U 16 slots media converter chassis. The 14 slots media converter chassis supports plug-and-play installation of stand-alone media converters convert modules. It can hold at most 14 pieces media converters. The 16 slots media converter chassis media converter chassis should be used with card-type media converters. The 16 slots media converter chassis can hold at most 16 card-type converters of 10/100M.

Key Features
For up to 14 Media Converters
Standard:IEEE802.3 10/100 Base T Ethernet, IEEE802.3U, 100Base V TX/FX Fast Ethernet, IEEE802.3 x Flow control, IEEE802.3.1q VLAN, IEEE802.1p QoS, IEEE802.1d Spanning Tree
Power configuration: Single power supply; or Dual power supply for warm backup mode
Hot Swap Support for the Converters to ensure a flexible connection
Equipped with a second, redundant Power Supply for maximum stability and reliability
Applications
Numberof slots: 14
Media converters adapted: 14 slots chassis card-type media converters
Power in: AC 100 V~260 V, 50~60Hz ; OR DC 48V
Power out: DC + 5V , 12A(single power) or 24A(dual power)
Diameter of DC plug: 2.5/5.5 mm
Pipple:≤50Mv
Noise:≤50 Mv
Protection of power supply: circuit-breaker when over voltage ;circuit-breaker when over flow ;circuit-breaker when short circuit
Operating Temperature: 0℃~50℃
StorageTemperature: -20℃~85℃
Relative Humidity: 5%~95%
Dimensions: L485,W231,H90 mm ;19inches 2U

OTDR In Fiber Construction Process Testing

As we all know, optical fiber because of light weight, corrosion resistance, immunity to electromagnetic interference image, in the area of environmental adaptability than cable, fiber optic line quality is good or bad depends on the cable quality and construction process. According to the structure of the fiber optic cable, cable construction process, in strict accordance with the specifications construction, fiber optic cable by the injury a chance. Once the fiber optic cable construction requires the help of OTDR in order to understand the status of the fiber-optic lines by the human eye is not known, it is in the maintenance and operation of the fiber optic cable lines, with OTDR testing fiber link is very important and necessary.

OTDR in fiber construction process testing generally need four tests: Incoming test,Welding before testing, After welding testing and acceptance testing after construction.

(1) before laying the fiber optic cable for each fiber in the fiber optic cable must first be tested, because the fiber optic transport from the factory to the buyer unit and then transported to the site through the middle of the up and down loading, unloading, there is no guarantee optic cablefrom damage. So, tested before laying fiber optic cable in order to draw the lines of responsibility, which is make sure the fiber optic cable is good before construction. Maintenance operations perspective, the test has two purposes: First, to ensure the cable is not damaged due to the construction, the second is to determine long cable lines, in order to avoid not long enough.

(2) Cable laying continues must also re-test, which is due to the advancement of technology, fiber splicing machines weld quality has been greatly improved, making the weld point loss is no longer the main factor of the fiber line loss. Because of splice loss is small, the optical signal after passing through the point, the changes in the optical power is not obvious when the OTDR test, not easy to judge out, but is also easy to find a test curve of the optical fiber link to splice point, On the future operation and maintenance, which will generate a lot of inconvenience: First line maintenance, resulting in picking difficult because I do not know just how long the paragraph cable; line change then not easy change contact general should be selected in the jointsthe position, because of the curve in the welding point is not obvious, may not find the fusion point can not be changed then. So, before connecting again testing to prevent the occurrence of such problems, and can verify that the fiber optic cable in the arm when no cable damage. Connection before testing and OTDR test the same way, just splice in the cable before the first test cable length and the loss of data stored, to establish the length of the line segment and the loss of the database, as an important reference for future line maintenance.

(3) Cable welding again with OTDR testing, the test has two effects: First, test weld point splice loss does not exceed the stipulated requirements, once found excessive point can again re-welding, the second is the use of testand control cable core wire, weld to hundreds-core optical fiber there is no guarantee that it will not take wrong.

Many welding cable link, link the individual excessive weld point, generally speaking, there are two reasons: First, the fiber of the reasons, that successive points at both ends of the fiber numerical aperture difference is too large, may be due to differentthe manufacturers, however, with the advances in optical fiber manufacturing technology, this difference is getting smaller and smaller; another weld reasons, caused by human negligence or fault of welding machine.

Identify failed weld point fiber link with OTDR must be carefully tested and carefully judged on unqualified to be taken seriously, otherwise this point may cause deterioration of the fiber link special fast the most direct reason.

(4) After the completion of the fiber optic cable project, but also the final test of the line, the construction side of the test cable link self-test, self-examination, self-test, the test data can be used as the reference when the subsequent acceptance, acceptance-square test according to the standardacceptance testing requirements, the length of the fiber optic cable link, link loss and splice loss, the establishment of a database of test data, as an important reference for future operation and maintenance.

Final test also can take advantage of the light source, optical power meter,, and OTDR three instruments common, before they are used to test the wear and tear of the optical signal transmission within the actual link with OTDR is to find the bad linkweld point and location.

Fiber optic link loss is measured by the light source and the optical power meter, the measurement, the transmitting end and the receiving end of each take one person, before the test, the two sides of the optical fiber in the cable of the test sequence (according to the color of the optical fiber coating material) can be agreed doingAnother advantage is that timely detection the miswiring fiber.

Source: http://www.fiberstore.com/tutorial.html

OLS2-Dual Laser Light Source

 

Description

The OLS2-Dual laser source is a cost-effective, rugged, handheld instrument designed for performing insertion loss measurements on single-mode fiber optic links when used with an optical power meter. When paired with an optical fiber identifier, the OLS2-Dual may be used for fiber identification. The laser output is stabilized to ensure accurate test results per current TIA/EIA requirements.

The OLS2-Dual features 1310nm and 1550nm (or 1550nm and 1625nm) LASER output from a single output port and is easy to operate. This light source offers 4 modes of operation: Dual wavelengths sending ID, single wavelength sending ID, CW, and modulated Tone. [Active Output], [Tone], [Battery], and [External Power] indicators identify the currently enabled operating mode, battery charge status, and external power presence.

In addition to being powered by two AA alkaline batteries, the OLS2-Dual can be powered by optional AC adapter and/or rechargeable NiMH battery pack.
The OLS4 is fully N.I.S.T. traceable.

Key Features

Rugged, handheld, lightweight
Dual wavelengths from a single port
Certify single-mode links per TIA/EIA standards
AA alkaline, optional rechargeable NiMH battery pack or AC adapter
270 Hz, 330 Hz, 1 kHz, and 2 kHz supported Tone (2 kHz default)
Dual Wave ID, single Wave ID, CW, and modulated Tone
Long battery life
Low battery indicator
Adjustable output
Cost-effective, easy to use
N.I.S.T. Traceable

Applications

The OLS2-Dual may be substituted for terminal equipment in the central offi ce or head- end to provide a stable output for loss measurements.
For single-mode applications, such as Telecom or CATV, the OLS2-Dual may be coupled with an optical power meter as a test kit to perform optical loss tests at 1310 and 1550nm.
In the modulation Tone mode, the OLS2-Dual generates a Tone signal into the fiber. This signal is detected by the OFI-200, optical fiber identifier, to isolate specific fibers in a bundle prior to splicing or rerouting.

Specifications

Optical DLS2-Dual(single port)
Output wavelength(nm) 1310 ±20, 1550±20
Output power 0 dBm
Laser classification Class 1 (FDA 21 CFR 1040.10 and 1040.11, and IEC 60825-1)
Output Power >SC,FC, ST are all available
Stability ± 0.05 dB over 1 hour (after 15 min. warm-up)
± 0.1 dB over 8 hours (after 15 min. warm-up)
Spectral width(FWHM) 5nm (max)
General
Power 2 x AA batteries, optional AC adapter
Battery life (2 x AA) Typical 120 hours, Minimum 75 hours
Operating temperature -10 to 50°C, 90% RH (non-condensing)
Storage temperature -30 to 60°C, 90% RH (non-condensing)
Size (H x W x D) 14.0 x 8.1 x 3.8 cm (5.5 x 3.2 x 1.5 in)
Weight 0.29 kg (0.65 lb)

Cisco XENPAK-10GB-ER

 

Description

NEW Cisco XENPAK-10GB-ER Compatible 10GBase-ER XENPAK Transceiver Module
Manufacturer: FiberStore
Product Type: XENPAK transceiver module
Interfaces/Ports: 1 x 10GBase-ER
Interfaces/Ports Details: 1 x SC Duplex Connector 10GBase-ER
Data Transfer Rate: 10 Gbps
Wavelength: 1550nm
Transfer Distance: 40km

Applications

10G Ethernet
Metropolitan Area Network
Building Vertical Riser
Inter and Intra Campus
Data Centers
Other Optical Links

Warranty

30-day money back guarantee
All of our transceivers come with a lifetime advance replacement warranty

Labeling
FiberStore Labels as default
Generic Labels
Specific Labels as Request
No Labels

Packaging

antistatic bag
packed on pallets in a box(Default Customer Options)
Specific Labels as Request
Seperate white Box for each transceiver

Shipment

International Express: Fedex, DHL, UPS, TNT and EMS.If you have another preferred carrier, please notify us in advance.
FedEx Overnight: It will take 1-3 business days (weekends and holidays excepted) for delivery.
DHL: It will take 2-4 business days (weekends and holidays excepted) for delivery. For Spain, Italy, Brazil and some other countries, items will take longer time to arrive due to customs clearance period.
Shipments are usually dispatched within 2 working days after received payment

FiberStore is an professional manufacturer & supplier of transceivers. All of our transceivers are tested in-house prior to shipping to guarantee that they will arrive in perfect physical and working condition. We guarantee transceivers to work in your system and all of our transceivers come with a lifetime advance replacement warranty.

What Do You Should To Know About Fiber Optic Tester

Fiber Optic is the most effective way of transferring data. At present, fiber optic is the one of the great innovations in modern telecommunications technology. Just like all other forms of technological wonders, fiber optic needs to be tested for defects which can possibly block its transmission efficiency. We need a device called a fiber optic tester to do this.

Contamination and damages are the two main reasons why fiber optics can lose its efficacy. An optical can become tainted by dust and oil deposits in its transmission path and it can also be harmed by the
natural wearing away or cracks and pits formed in the thread. With a high-quality fiber optic tester, there wouldn't be any difficulty detecting these defects. And with the convenience of different types of testers in the market, there is a device to test fiber optics and other related tools like gigabit converters and XFP transceivers.

The one kind of tool is continuity tester. It uses a light source to transmit light from one of the fiber and detect light at the other end to detect any possible defects. Although continuity tester can
identify the flaw, they are impractical when it comes to providing a detailed data about the type of flaw. The insertion loss tester is another kind of device, which is a good thing. Information about the total loss in the fiber per kilometer in addition to highlighting the bends, splices and links in the fiber or transceiver is supplied by the insertion loss tester. But the OTDR or optical time domain reflectometer is the best type of fiber optic tester.It doesn't only provide the extensive data about the damage such as length and splice losses, connector losses and fiber defects at the same time it also stores data electronically. It is considered as the most advanced tester.

It's not enough only to find out the flaws in the optics, but these defects should be eliminated by cleansing the cables themselves. You can clean them by using a solvent like isopropyl alcohol or better yet, use fiber specific solvents or air blast the fiber cables.

But then again, you don't need to assess them anymore, if you make use of the highest quality optics, since you're quite convinced that these fiber optics adopted industry standard quality specifications for efficiency and functionality and can endure contamination and damages for a long time. So, to avoid the hassle of testing and buying fiber optics tester, begin with buying the best fiber optic cables, gigabit converters and sfp transceivers from a trusted leader in transceivers.

Source: http://www.fiberstore.com

Fibre Optic Stainless Steel 96 Core Outdoor Cable Distribution Box

Fibre Optic Stainless Steel 96 Core Outdoor Cable Distribution Box

 

Product Description

This product is designed for the connection between the Optical fiber cable and the main points, and it is a kind of port device. It has the function of direct or indirect connection, coiling, storage, and dispatching on the fiber cable .

Key Features

Stainless steel materials with electrostatic powder coating, corrosion-resistant and anti-aging properties
Fusion and distribution integration module design, 12 core per mudule, make a big capacity
Easily frontal operation
Function include: distribution, bonding, storage, adjust, etc.
Sealing performance meets the IP65-level requirements of GB4208 standard, suitable for outdoor distribution
Cabinet with high base,big space which is easy for the cable entry, easy and convenient to install. Safely grounding
Optical cables, wire jumper and storage unit are all separately. Clear mark for bonding and distribution
FC or SC adapter are installed 40 degree dip angle which prevents eyes from arc light and also convenient for ribbon and non-ribbon optical fibers fixing
Radius of curvature for optical fiber ≥30mm
Hanging or flooring installationnstalled by the fusion module

Specificatios

Large capacity
High Density
Good corrosion resistance
Ageing resistance performance
Good sealing performance
700*500*300MM

Technical Parameters

Nominal work wave-length: 850nm, 1310nm, 1550nm
Operating temperature: -5°C-+40°C
Storage temperature: -40°C +70°C
Relative humidity: ≤85%(+30°C)
Atmospheric pressure: 70~106 KPa
Insertion loss: ≤0.2dB
Return loss: ≥45dB (PC), ≥50dB(UPC), ≥60dB(APC)
Isolation resistance: ≥1000MΩ/500V(DC)
Durability: 1000 times
Anti-voltage strength: ≥3000V(DC)/1min

This product belong to FiberStore of Cross Connect Cabinet, FiberStore.com is a worldwide leading manufacturer & supplier of fiber optic products. We have been in these business almost 7 years. We have our own factory and our own professional R&D department. We are specializing in supplying fiber optic components and network equipment.

10mW New Visual Fault Locator For Sale In FiberStore

 

Fiber visual fault locator is is a kind of device which is able to locate the breakpoint, bending or cracking of the fiber glass. It can also locate the fault of OTDR dead zone and make fiber identification from one end to the other end. Designed with a FC,SC,ST universal adapter, this fiber fault locator is used without any other type of additional adapters, it can locates fault up to 10km in fiber cable, with compact in size, light in weight, red laser output.

10mW new visual fault locator fiber optic laser tester 10km is specially designed for field personnel who need an efficient and economical tool for fiber tracing, fiber routing and continuity checking in an optical network during and after installation. 

Features:

Easy to check fiber faults with visual red laser light
FC, SC, ST General interface
Sturdy and durable shell
Constant output power
Long inspection distance
Operates in either CW (Continuous wave) or pulse (Both modes are available)
Pen pattern design, convenient for use and carry
Compact in size, light in weight, red laser output, both SM and MM available

Specifications:

Wavelength: 650±10nm;
Fiber mode: SM, MM;
Output power: 10mW;
Inspection distance: 10Km;
Electrical source: 2 x AAA 1.5V Alkaline Batteries
Working time of batteries: More than 15 hours;
Operating Temperature: 10~60℃;
Storage Temperature: -40~+85℃;
Material of shell: Cu-alloy;.

FiberStore supply all kinds of high quality fiber optic products in China, such as fiber transceiver, fiber splitter, fiber optic tester and so on.

Cisco XFP-10GZR-120 Compatible 10GBase -ZR 120KM XFP transceiver

Description

Cisco compatible XFP transceiver support Ethernet, Sonnet/SDH and Fiber Channel applications across all Cisco switching and routing platforms.
The Cisco Compatible XFP-10GZR-120-FS is 1550nm 120km XFP single-mode for 10GbE/10GFC/SDH/SONET Duplex XFP Transceiver RoHS Compliant.

Key Features

10GBASE-ZR XFP 1550nm 120km optical transceiver
High Quality with ISO9001, TUV, CE, FCC, UL and RoHS certificates
Condition: Factory New
Fully compatible with Cisco
Supports 9.95Gb/s to 11.1Gb/s bit rates
Hot-pluggable XFP footprint
Link length up to 120km
Temperature-Stabilized EML transmitter
Duplex LC connector
Power dissipation <3.5W
Built-in digital diagnostic functions
Case Operating Temperature: Standard: 0°C to 70°C Industrial: -40C to 85°C
Complaint with XFP MSA

Application

10GBASE-ZR 10G Ethernet
1200-SM-LL-L 10G Fiber Channel
SONET OC-192 IR-2
SDH STM S-64.2b
SONET OC-192 IR-3
SDH STM S-64.3b
ITU-T G.709

Specifications

Manufacturer Part Number: Cisco XFP-10GZR-120
Form Factor: XFP
Device Type: Transceiver module
Interface (Bus) Type: Plug-in module
Connectivity Technology: Wired
Application: 10GBASE-ZR
Data Transfer Rate: 10Gbps
Wavelength: 1550nm
Max Distance: 120km
Fiber Type:SMF
Connector: Duplex LC
DDM: With DDM
Operating Temperature: 0~70 °C

This product belong to FiberStore of Cisco XFP. FiberStore is an professional manufacturer & supplier of transceivers. All of our transceivers are tested in-house prior to shipping to guarantee that they will arrive in perfect physical and working condition. We guarantee transceivers to work in your system and all of our transceivers come with a lifetime advance replacement warranty.

Cisco XFP-10GZR-OC192LR Compatible 10GBase-ZR XFP Transceiver For Sale In FiberStore

Description

Cisco XFP-10GZR-OC192LR

The Cisco Compatible XFP-10GZR-OC192LR is 1550nm 80km XFP single-Mode for 10GbE/10GFC/SDH/SONET Duplex XFP Transceiver RoHS Compliant.

Key Features

10GBASE-ZR XFP 1550nm 80km optical transceiver
High Quality with ISO9001, TUV, CE, FCC, UL and RoHS certificates
Condition: Factory New
Fully compatible with Cisco
Supports 9.95Gb/s to 11.1Gb/s bit rates
Hot-pluggable XFP footprint
Link length up to 80km
Temperature-Stabilized EML transmitter
Duplex LC connector
Power dissipation <3.5W
Built-in digital diagnostic functions
Case Operating Temperature: Standard: 0°C to 70°C Industrial: -40C to 85°C
Complaint with XFP MSA

Application

10GBASE-ZR 10G Ethernet
1200-SM-LL-L 10G Fiber Channel
SONET OC-192 IR-2
SDH STM S-64.2b
SONET OC-192 IR-3
SDH STM S-64.3b
ITU-T G.709

Specifications

Manufacturer Part Number: XFP-10GZR-OC192LR
Form Factor: XFP
Device Type: Transceiver module
Interface (Bus) Type: Plug-in module
Connectivity Technology: Wired
Application: 10GBASE-ZR
Data Transfer Rate: 10Gbps
Wavelength: 1550nm
Max Distance: 80km
Fiber Type:SMF
Connector: Duplex LC
DDM: With DDM
Operating Temperature: 0~70 °C

This Cisco XFP-10GZR-OC192LR belong to FiberStore of Cisco XFP transceiver. FiberStore is an professional manufacturer & supplier of XFP-10GZR-OC192LR transceivers. All of our XFP-10GZR-OC192LR transceivers are tested in-house prior to shipping to guarantee that they will arrive in perfect physical and working condition. We guarantee XFP-10GZR-OC192LR transceivers to work in your system and all of our XFP-10GZR-OC192LR transceivers come with a lifetime advance replacement warranty.

Source: http://www.fiberstore.com

Cisco XFP-10GZR-OC192LR Compatible 10GBase-ZR XFP Transceiver For Sale In FiberStore

Description

Cisco XFP-10GZR-OC192LR

The Cisco Compatible XFP-10GZR-OC192LR is 1550nm 80km XFP single-Mode for 10GbE/10GFC/SDH/SONET Duplex XFP Transceiver RoHS Compliant.

Key Features

10GBASE-ZR XFP 1550nm 80km optical transceiver
High Quality with ISO9001, TUV, CE, FCC, UL and RoHS certificates
Condition: Factory New
Fully compatible with Cisco
Supports 9.95Gb/s to 11.1Gb/s bit rates
Hot-pluggable XFP footprint
Link length up to 80km
Temperature-Stabilized EML transmitter
Duplex LC connector
Power dissipation <3.5W
Built-in digital diagnostic functions
Case Operating Temperature: Standard: 0°C to 70°C Industrial: -40C to 85°C
Complaint with XFP MSA

Application

10GBASE-ZR 10G Ethernet
1200-SM-LL-L 10G Fiber Channel
SONET OC-192 IR-2
SDH STM S-64.2b
SONET OC-192 IR-3
SDH STM S-64.3b
ITU-T G.709

Specifications

Manufacturer Part Number: XFP-10GZR-OC192LR
Form Factor: XFP
Device Type: Transceiver module
Interface (Bus) Type: Plug-in module
Connectivity Technology: Wired
Application: 10GBASE-ZR
Data Transfer Rate: 10Gbps
Wavelength: 1550nm
Max Distance: 80km
Fiber Type:SMF
Connector: Duplex LC
DDM: With DDM
Operating Temperature: 0~70 °C

This Cisco XFP-10GZR-OC192LR belong to FiberStore of Cisco XFP transceiver. FiberStore is an professional manufacturer & supplier of XFP-10GZR-OC192LR transceivers. All of our XFP-10GZR-OC192LR transceivers are tested in-house prior to shipping to guarantee that they will arrive in perfect physical and working condition. We guarantee XFP-10GZR-OC192LR transceivers to work in your system and all of our XFP-10GZR-OC192LR transceivers come with a lifetime advance replacement warranty.

FiberStore Supply Cisco Compatible XENPAK Transceiver

Cisco compatible XENPAK transceiver support Ethernet, Sonnet/SDH and Fiber Channel applications across all Cisco swithching and routing platforms. FiberStore offers cost-effective standards-based Cisco Compatible XENPAK Transceivers. As a 3rd party OEM manufacturer, our Cisco XENPAK is delivered to worldwide from our factory directly. All of our Cisco XENPAK optical transceivers are tested in-house prior to shipment to guarantee that they will arrive in perfect physical and working condition. Buy with confidence.

Production

FiberStore supply A series of Cisco XENPAKs, NEW Cisco XENPAK-10GB-LR Compatible 10GBase-LR XENPAK Transceiver Module, Cisco XENPAK-10GB-SR, Cisco XENPAK-10GB-ER, Cisco XENPAK-10GB-ZR. These items application in 10G Ethernet, metropolitan area network, building vertical riser, inter and intra campus, data centers and other optical links.

Packaging

antistatic bag
packed on pallets in a box(Default Customer Options)
Specific Labels as Request
Seperate white Box for each transceiver

Shipment

International Express: Fedex, DHL, UPS, TNT and EMS.If you have another preferred carrier, please notify us in advance.
FedEx Overnight: It will take 1-3 business days (weekends and holidays excepted) for delivery.
DHL: It will take 2-4 business days (weekends and holidays excepted) for delivery. For Spain, Italy, Brazil and some other countries, items will take longer time to arrive due to customs clearance period.
Shipments are usually dispatched within 2 working days after received payment

Save Cost By Buying From Original Manufacturer FiberStore Directly.

FiberStore is an professional manufacturer & supplier of transceivers. All of our transceivers are tested in-house prior to shipping to guarantee that they will arrive in perfect physical and working condition. We guarantee transceivers to work in your system and all of our transceivers come with a lifetime advance replacement warranty.

If you have questions about optics, please feel free to contact us at sales@fiberstore.com.

PON Power Meter FS607P FiberStore For Sale

 

Description

PON optical power meter is a tester designed for design, operation and maintenance of FTTX network. It is able to concurrently measure the optical power values of voice, data and video signals. It is an ideal choice for the construction and maintenance of FTTX network works.

Features
Providing simultaneous measurement at all three wavelengths on the fiber (1490nm, 1550nm, 1310nm)
Used in Burst mode measurement of 1310nm upstream
Dual-port through the design, guarantee the full communication testing from the OLT to the ONT
Three status LEDs represents different optical signal conditions of Pass, Warn and Fail respectively
Easy to use, simply connect the fiber to read the results
HD TFT color LCD
USB communication port enables data transfer, easy and quick
200 measurement items can be saved in PON power meter or computer for data review
Through the background software setting threshold, upload data, calibration wavelength
Auto power off function, and time settings on the device, the threshold setting

Applications

FTTx / PON opening: In the opening stage of all PON signals are measured to verify and ensure that meet network standards
FTTx / PON maintenance: routine maintenance of various transport issues, such as: connector end surface contamination, fiber macro bending, breaking, Optical fault, etc.; that will have a loss of signal or transmission performance simultaneously measure and display 1310 upstream, 1490 downstream and 1550 downstream the power of three wavelength values.

Order Information

FS607P PON optical power meter
Operation Manual
USB data transmission lines
User Guide
9V Alkaline Battery
AC adapter
Product Warranty Cards
Certificate
Desiccant
Clean cotton swab
Portable Bag

FS-5000 OTDR (28/26 dB) For Sale in FiberStore

FS-X000 OTDR series handheld optical time domain reflectometry (OTDR) is the latest FTTx optical fiber cable-based test instruments. Integrated machining, elegant appearance, splash design, small size, light weight, durable. Built-in three test wavelengths and visual fault locator (VFL) function is tailored FTTx network testing a new product.

FS-5000 OTDR (28/26 dB) product description blow:

 

Model FS-5000

wavelength 1550nm/1625nm +20nm

Fiber Type Single-Mode Fiber

Dynamic Range 28/26dB

Accuracy: +1m+ Sampling interval +0.003% Distance)( not include Refractive index into error)

Event dead zone: 1.6m

Resolution: 0.1m-16m

Range (Single-Mode Fiber): 1.6m/0.1m-16m

Pulse width (Single-Mode Fiber): 1.6km~80km/10ns~10240ns

Loss Threshold: 0.01Db

Sampling Points: 65K

Linearity: 0.05dB/dB

Waveform storage: 800

Refractive index setting range:1.00000~2.00000

Display: Color TFT LCD 5.1 inch 648*480 (Optional touch screen operation)
Optional touch screen operation

Interface: USB

Optical output interface: FC/UPC(Standard, optional universal connector)

Size: 215*130mm*66mm/1000g

Weight: 1kg

FiberStore supply all kinds of fiber optic tester, and welcome to visit our website.

FiberStore Supply Fiber Optic Light Source FS7002

Fiber optic light source is a necessity for performing fiber optic network testing to measure the fiber optical loss for both single mode fiber cable and multimode fiber cables. They are designed to cover a variety of wavelength ranges to suit all optical testing needs and usually the optical light sources are used with the fiber optic power meter to test the fiber system loss. Light sources are offered in a variety of types including LED, halogen and laser. Usually the optical light source is used with the fiber optic power meters,they act as an economic and efficient solution for the fiber optic network works.

Fiber Optic Light Source FS7002

Description

FS7002 Handheld Laser source series is microprocessor-controlled intelligent Handheld Laser source. It can be used to test the usual single-mode optical fiber connector loss，a single-mode fiber-optic network, LAN, FDDI, ATM , FTTH fiber optic systems, It also can test the telecommunications networks, CATV systems which need large dynamic range test system maintenance. The handheld stable source with the international advanced level in the micro-processing hardware ,software technology , microelectronic technology, and surface mount (SMT) technology provides its users with high performance, high reliability, which are the best performance at home and the most practical appearance of the light source. With the current international advanced level, handheld light source provides continuous or modulated light output (2 KHz) in the state of the two working conditions.

Features

Larger and more stable output power comparable to desktop source, stabilized output Using the Single key to switch the wavelength is flexible and convenient, high reliability Universal interface has three types of adapter: FC /SC / ST Easy to operate Small size/light weight/ high reliability, flexibly switch the wavelength Battery-powered, convenient field work, omnipotence joint Backlight at night.

Applications

Fiber production and research devices
Fiber Network Testing and Maintenance
Optical Communication Teaching and Test

This fiber optic product information from FiberStore.com

Fiber Optic Splitters

Fiber optic splitter is used to split one beam of optical fiber light into several parts at a certain ratio, for example, a 1X4 LC type equal splitting ratio fiber optic splitter can split the fiber optic light signal into four equal 25% parts and sent to the 4 different channels, LC is the connector type on the splitters. Fiber optic splitter key parameters include the optical loss, splitting ratio, isolation, PDL etc.

Fiber Optic Splitter Features

Single Mode, multimode, and PM fiber types
Multiple port configurations
Various splitting ratios, 50:50 to 1:99
Tube type or Box type
PC, UPC, and APC fiber optic connectors
Available with FC, SC, ST, LC, and MU terminations

Fiber Optic Splitters Introduction

fiber optic splitter is a device that split the fiber optic light into several parts by a certain ratio. For example, when a beam of fiber optic light transmitted from a 1X4 equal ratio splitter, it will be divided into 4-fiber optic light by equal ratio that is each beam is 25% of the original one. fiber optic splitter is different from WDM. WDM can divide the different wavelength fiber optic light into different channels. fiber optic splitter divide the light power and send it to different channels.

Single window Fiber Optic Splitter and dual window Fiber Optic Splitters
Here the window refers to the working wavelength. Single window fiber optic splitter is with one working wavelength, dual window fiber optic splitter is with two working wavelength. For multimode fiber, the term means that the fiber is optimized for 850 nm and 1310 nm operation. For single-mode fibers, the term means that the fiber is optimized for 1310 nm and 1550 nm operation. For single window fiber optic splitter, its working wavelength usually is one of the above said wavelength.

PLC Splitter

Planar waveguide is a micro-optical components products, the use of lithography, the semiconductor substrate in the medium or the formation of optical waveguide, to achieve branch distribution function.

PLC splitter package is on the light guide path in the planar waveguide splitter (ie, the fiber waveguide path) and the fiber array-aligned, and then stick with plastic (such as epoxy glue) A combined technology. PLC splitter and fiber array alignment accuracy is the key to this technology. PLC splitter package relates to the six-dimensional fiber arrays and waveguide close alignment difficult.When using manual operation, the drawback is low efficiency, poor reproducibility, and human factors are many and difficult to achieve large-scale production.
PLC splitter using semiconductor processes (lithography, corrosion, developing technology) production. Waveguide array in the chip surface, the shunt functions are integrated on the chip, which is implemented in a chip 1,1 such as shunt; the chip at both ends respectively coupled to the input and output multi-channel fiber array encapsulation.

Source: http://www.fiberstore.com/tutorial.html

FiberStore Supply 10GBase-sr xfp Transceiver

10GBase-sr xfp

The XFP-SR-03-FS is a multi-purpose optical transceiver module for 10Gbit/s data transmission applications at 850nm. It is ideally suited for 10 GbE datacom (belly-to-belly for high density applications) and storage area network(SAN/NAS) applications based on the IEEE 802.3ae and Fibre Channel standards Designed for short range distances the transceiver module comprises a transmitter with a vertical cavity surface emitting laser (VCSEL) and a receiver with a PIN photodiode.

Key Features

10GBASE-SR XFP 850nm 300m fiber transceiver
High Quality with ISO9001, TUV, CE, FCC, UL and RoHS certificates
Condition: Factory New
Fully compliant to XFP MSA Rev.4.5
Support of IEEE 802.3ae 10GBASE-SR at 10.3125 Gbit/s
Duplex LC Connector
Operating Case Temperature Standard: 0C~+70C
Duplex LC connector
Transmission distance up to 300m with OM3 MMF; 82m with OM2 MMF; 33m with OM1 MMF
Low power consumption 1.5W(typ.)
Wide operating temperature range: Standard: 0C to +70C Industrial: -40C to +85C
Vertical Cavity Surface Emitting Laser at 850nm(VCSEL)
LC duplex connector
XFI loopback supported
LC duplex connector

Specifications

Manufacturer: FiberStore
Form Factor: XFP
Device Type: Transceiver module
Interface (Bus) Type: Plug-in module
Connectivity Technology: Wired
Application: 10GBASE-SR
Data Transfer Rate: 10Gbps
Wavelength: 850nm
Max Distance: 300m
Fiber Type: MMF
Connector: Duplex LC
DDM: With DDM
Operating Temperature: 0~70 °C

FiberStore is an professional manufacturer & supplier of transceivers. All of our transceivers are tested in-house prior to shipping to guarantee that they will arrive in perfect physical and working condition. We guarantee transceivers to work in your system and all of our transceivers come with a lifetime advance replacement warranty.

Cisco XFP-10GZR-120

The Cisco Compatible XFP-10GZR-120-FS is 1550nm 120km XFP single-Mode for 10GbE/10GFC/SDH/SONET Duplex XFP Transceiver RoHS Compliant.

Cisco XFP-10GZR-120

Key Features

10GBASE-ZR XFP 1550nm 120km optical transceiver
High Quality with ISO9001, TUV, CE, FCC, UL and RoHS certificates
Condition: Factory New
Fully compatible with Cisco
Supports 9.95Gb/s to 11.1Gb/s bit rates
Hot-pluggable XFP footprint
Link length up to 120km
Temperature-Stabilized EML transmitter
Duplex LC connector
Power dissipation <3.5W
Built-in digital diagnostic functions
Case Operating Temperature: Standard: 0°C to 70°C Industrial: -40C to 85°C
Complaint with XFP MSA

Application

10GBASE-ZR 10G Ethernet
1200-SM-LL-L 10G Fiber Channel
SONET OC-192 IR-2
SDH STM S-64.2b
SONET OC-192 IR-3
SDH STM S-64.3b
ITU-T G.709

Specifications

Manufacturer Part Number: XFP-10GZR-120
Form Factor: XFP
Device Type: Transceiver module
Interface (Bus) Type: Plug-in module
Connectivity Technology: Wired
Application: 10GBASE-ZR
Data Transfer Rate: 10Gbps
Wavelength: 1550nm
Max Distance: 120km
Fiber Type:SMF
Connector: Duplex LC
DDM: With DDM
Operating Temperature: 0~70 °C

Packaging

antistatic bag
packed on pallets in a box(Default Customer Options)
Specific Labels as Request
Seperate white Box for each transceiver

Shipment

International Express: Fedex, DHL, UPS, TNT and EMS.If you have another preferred carrier, please notify us in advance.
FedEx Overnight: It will take 1-3 business days (weekends and holidays excepted) for delivery.
DHL: It will take 2-4 business days (weekends and holidays excepted) for delivery. For Spain, Italy, Brazil and some other countries, items will take longer time to arrive due to customs clearance period.

NEW 10GB X2 LR 1310nm 10km Optical Transceiver

FiberStore 10G X2 is a standardized form factor for 10 Gb/s fiber optic transponders that is used for data transfer rates from 10.3 Gb/s to 10.5 Gb/s.

 

Description

10GBase-lr x2

Manufacturer: FiberStore
Product Type: X2 transceiver module
Interfaces/Ports: 1 x 10GBase-LR
Interfaces/Ports Details: 1 x SC Duplex Connector 10GBase-LR
Data Transfer Rate: 10 Gbps
Wavelength: 1310nm
Transfer Distance: 10km

Applications

10G Ethernet
Metropolitan Area Network
Building Vertical Riser
Inter and Intra Campus
Data Centers
Other Optical Links

Warranty

30-day money back guarantee
All of our transceivers come with a lifetime advance replacement warranty

Labeling

FiberStore Labels as default
Generic Labels
Specific Labels as Request
No Labels

Packaging
antistatic bag
packed on pallets in a box(Default Customer Options)
Specific Labels as Request
Seperate white Box for each transceiver

FiberStore is an professional manufacturer & supplier of transceivers. All of our transceivers are tested in-house prior to shipping to guarantee that they will arrive in perfect physical and working condition. We guarantee transceivers to work in your system and all of our transceivers come with a lifetime advance replacement warranty.