Fiber Lasers Improve Seven Reasons

What promoted the rapid development of fiber lasers, in fact, the reason is very simple, because now the society is a technological device, high-tech competition is very intense, not eliminated is the destruction, so we for development and progress.Visible Fiber Laser
(1) because of its very nature, the fiber is largely rely on self-cooling, thus reducing the thermal lens effect, and simplifies the laser design. Benign thermal factors means that the cooling requirements are not like the other heap pumped by semiconductor diode bars and semiconductor diode lasers are designed to be as harsh.
(2) as the pump source, single-emitter pole pump diode semiconductor diode bars and semiconductor diode reactor have the advantages of more reliable than The life of the pump diode is usually greater than 100,000 hours, and not require replacement during the life of the continuation of the processing system of the entire laser marking machine. The high intensity of the aging test to further improve reliability.
(3) in-depth scientific research to increase the heat load of the fiber, without any thermal decay or light-induced absorption effect and the influence of stimulated Raman scattering (SRS), which previously, these are often perceived as a limiting factor of the fiber laser , is now only for high average power lasers in terms of the
4 Increase the diode pump power and improve the efficiency of the pump to a higher average power.
Variety of fiber diameters and plug and play fiber optic available to all types of space energy distribution; small single-mode Gaussian fiber for cutting, drilling, large diameter multimode fiber used for welding or surface treatment. A continuous-wave single-mode fiber laser with an example, 50 micron diameter fiber, you can very simply into a welding laser cutting laser, focusing optics need to do is simply replace the terminal.
6 can transmit up to 25 kilowatts of power fiber adapter. Developed a fiber laser power beam switch for fiber-to-fiber connection can be up to six channels, the switching time of less than 10 milliseconds. For each channel to provide a visible red alignment beam.
More high-speed electronic components, advanced interface, control, and network software have been developed.
This information from fiber optic products store: Fiberstore