FiberStore Supply Optical Fiber Identifier JW3306B In China

Optical fiber identifier is an essential installation and maintenance instrument which can identify the optical fiber by detecting the optical signals transmitted through the cables, during this process the fiber optic identifier do no harm or damage to the fiber cable and it also do not need opening the fiber at the splice point for identification or interrupting the service.

Fiberstore now supply JW3306B Optical Fiber Identifier and AFI400 Optical Fiber Identifier Welcome to our store. JW3306B Optical Fiber Identifier can quickly identify the direction of transmitted fiber and display the relative core power without any damages to the bended fiber. When the traffic is present, the intermittently audible tone is activated.

JW3306B Optical Fiber Identifier Features:

Easy-to-use with “ONE KEY” operation
Efficiently identifies the traffic direction and frequency tone (270Hz, 1KHz, 2KHz) with audible warning.
Displays the relative core power
More accurate test with Sunshade
Easy-to-replace adaptors
Durable metal housing and quality construction
Lower power indication

AFI400 Optical Fiber Identifier Features:

Support to detect optical signals without disrupting traffic
Based on non-destructive technology
Indicate the signal direction in fiber
Detect a variety of optical tones, 270Hz, 1kHz and 2kHz
Suitable for 0.25mm, 0.9mm, 3.0mm fiber, and no need to replace the clamp block, more convenient than others
Build in visible fault locator 1mW or 10mW optional;
Battery low indication;
Powered by 2 units of 1.5V AA alkaline batteries;
One year guarantee

OLS2-Dual Laser Light Source

 

Description

The OLS2-Dual laser source is a cost-effective, rugged, handheld instrument designed for performing insertion loss measurements on single-mode fiber optic links when used with an optical power meter. When paired with an optical fiber identifier, the OLS2-Dual may be used for fiber identification. The laser output is stabilized to ensure accurate test results per current TIA/EIA requirements.

The OLS2-Dual features 1310nm and 1550nm (or 1550nm and 1625nm) LASER output from a single output port and is easy to operate. This light source offers 4 modes of operation: Dual wavelengths sending ID, single wavelength sending ID, CW, and modulated Tone. [Active Output], [Tone], [Battery], and [External Power] indicators identify the currently enabled operating mode, battery charge status, and external power presence.

In addition to being powered by two AA alkaline batteries, the OLS2-Dual can be powered by optional AC adapter and/or rechargeable NiMH battery pack.
The OLS4 is fully N.I.S.T. traceable.

Key Features

Rugged, handheld, lightweight
Dual wavelengths from a single port
Certify single-mode links per TIA/EIA standards
AA alkaline, optional rechargeable NiMH battery pack or AC adapter
270 Hz, 330 Hz, 1 kHz, and 2 kHz supported Tone (2 kHz default)
Dual Wave ID, single Wave ID, CW, and modulated Tone
Long battery life
Low battery indicator
Adjustable output
Cost-effective, easy to use
N.I.S.T. Traceable

Applications

The OLS2-Dual may be substituted for terminal equipment in the central offi ce or head- end to provide a stable output for loss measurements.
For single-mode applications, such as Telecom or CATV, the OLS2-Dual may be coupled with an optical power meter as a test kit to perform optical loss tests at 1310 and 1550nm.
In the modulation Tone mode, the OLS2-Dual generates a Tone signal into the fiber. This signal is detected by the OFI-200, optical fiber identifier, to isolate specific fibers in a bundle prior to splicing or rerouting.

Specifications

Optical DLS2-Dual(single port)
Output wavelength(nm) 1310 ±20, 1550±20
Output power 0 dBm
Laser classification Class 1 (FDA 21 CFR 1040.10 and 1040.11, and IEC 60825-1)
Output Power >SC,FC, ST are all available
Stability ± 0.05 dB over 1 hour (after 15 min. warm-up)
± 0.1 dB over 8 hours (after 15 min. warm-up)
Spectral width(FWHM) 5nm (max)
General
Power 2 x AA batteries, optional AC adapter
Battery life (2 x AA) Typical 120 hours, Minimum 75 hours
Operating temperature -10 to 50°C, 90% RH (non-condensing)
Storage temperature -30 to 60°C, 90% RH (non-condensing)
Size (H x W x D) 14.0 x 8.1 x 3.8 cm (5.5 x 3.2 x 1.5 in)
Weight 0.29 kg (0.65 lb)