显示标签为“Fiber light Source”的博文。显示所有博文
显示标签为“Fiber light Source”的博文。显示所有博文

2012年6月25日星期一

Providing A Fiber Optic Light Source

Today low loss fiber optic systems offer almost unlimited bandwidth and unique advantages over all previously developed transmission media. The basic optical transmitters convert electrical signals into modulated used as the light source in optical transmitters are light emitting diode. Fiber optic light source make a good use of this, as light emitting diodes have relatively large emitting areas and used for moderate distances. Fiber optic light source prove to be economical.
A fiber optic light source device is mounted on a package that enables optical fiber to couple as much light as possible into the fiber. In some possible a tiny spherical lens is also fitted to collect and focus each possible light onto the fiber. LED’s i.e. light emitting diode and light diodes operate in infrared portion of electromagnetic spectrum. their operating wavelengths are chosen according to the need. Fiber optic light source is reliable and the most common wavelengths used by fiber optic light source today are 850 to 1300 nanometers or in some cases even 1500 nanometers. Both LED’s and LD’s (light diodes) are available in three wavelengths.
There are two methods through which light can be coupled into the fiber optic light source. One is by pig-tailing and the other is placing the fiber’s tip in very close proximity to an LED or LD. Since the only carrier in these systems is light there is no danger of electrical shock to the personnel repairing broken fibers.
Main function of Fiber Light Source is to enable the light pulses move in fiber and works on the principle of total internal reflection, which states that when the angle of incidence exceeds a critical value light can’t get out of the glass instead it bounces back. The fiber optic light source works on this principle as it enables to transmit information down fiber lines in the form of light pulses.
There are many kinds of sources available that act as a fiber optic light source. A fiber optic light source usually comes in a rugged splash proof case and has single switch operation. A fiber optic light source has combination source for showing on or low battery. A single battery in a fiber optic light source supplies over 850 nm and 1300 nm fiber optic light source supply. They provide 40 dB measurement ranges when used with Fiber OWL or Micro OWL. There are also laser models available in This category.
In case of 1310 nm or 1550 nm output supplies which are temperature compensated, a single battery provides over 60 hours of operation. It provides 50sB measurement range when used with Fiber OWL or Micro OWL.

2012年5月16日星期三

Fiber Light Source For Sale in Fiberstore

Fiber light Source is a kind of Fiber Optic Tester. Fiber optic light sources are a necessity for performing fiber optic network testing to measure the fibre optical loss for both single mode fiber cable and multimode fiber cables.They are designed to cover a variety of wavelength ranges to suit all optical testing needs and usually the optical light sources are used with the fiber optic power meter to test the fiber system loss. Light sources are offered in a variety of types including LED, halogen and laser. Usually the optical light source is used with the fiber optic power meters,they act as an economic and efficient solution for the fiber optic network works. Now,I will introduce the two Fiber Light Sources to us.
One: EXFO's ELS-50 Light Source provides excellent stability and high measurement accuracy for up to three single mode wavelengths or two multimode wavelengths. It is the perfect complement to the FiberBasix 50 EPM-50 Power Meter when it comes to measuring attenuation on fiber-optic links.
The new ELS-50 Optical Laser Source is the new tone generation for fiber identification. Its excellent power stability gives reliable loss measurements for Telco/CATV and FTTH applications.
EXFO's ELS-50 Light Source Key Features are Rugged design,Excellent power stability for reliable loss measurements,Interchangeable connector adapters, Up to 60 hours of battery life and Tone generation for fiber identification.

The Application Coverage are Telco/CATV and FTTH models; dual and triple wavelengths and Enterprise/LAN models; single mode and multimode.

Two: FS7002 Handheld Laser source series is microprocessor-controlled intelligent Handheld Laser source. It can be used to test the usual single-mode optical fiber connector loss,a single-mode fiber-optic network, LAN, FDDI, ATM , FTTH fiber optic systems, It also can test the telecommunications networks, CATV systems which need large dynamic range test system maintenance. The handheld stable source with the international advanced level in the micro-processing hardware ,software technology , microelectronic technology, and surface mount (SMT) technology provides its users with high performance, high reliability, which are the best performance at home and the most practical appearance of the light source. With the current international advanced level, handheld light source provides continuous or modulated light output (2 KHz) in the state of the two working conditions.
FS7002 Handheld Laser source Features are Larger and more stable output power comparable to desktop source, stabilized output Using the Single key to switch the wavelength is flexible and convenient, high reliability Universal interface has three types of adapter: FC /SC / ST Easy to operate Small size/light weight/ high reliability, flexibly switch the wavelength Battery-powered, convenient field work, omnipotence joint Backlight at night.
FS7002 Handheld Laser source is often application to Fiber production and research devices,Fiber Network Testing and Maintenance and Optical Communication Teaching and Test.