显示标签为“Crimping Tool”的博文。显示所有博文
显示标签为“Crimping Tool”的博文。显示所有博文

2012年7月5日星期四

What is a Punch Down Tool?

Most copper networks are built using twisted-pair cable. Twist-pair cables are terminated in jacks, cross-connect blocks (66 blocks), or patch panels (110 blocks). The termination is done with a tool known as punch down tool.
The termination connects the twisted-pair cable conductor with insulation-displacement connectors (IDC). IDC is a little knife blade with a V-shaped gap or slit between them.
The punch down tool punches down and forces the twisted-pair cable conductor into the V. Then the IDC connector makes contact by cutting through, or displacing, the insulation around a single conductor inside a twisted-pair cable.
The punch down tool pushes a conductor between the sides of a "V" inside an IDC, allowing the small metal "knife" inside the connector to make contact with the inner conductor inside the wire.
A punch-down tool is really just a handle with a special blade that fits a particular IDC.
There are two main types of punch down tools (corresponding to two types of IDC terminations): the 66-block and the 110-block.
The 66-block is mostly used in cross-connect blocks for voice cross-connects. The 110-block is now generic in usage and is a newer design by AT&T. 110-Block is most used for data network, although it is not absolutely so.
The process of punching down a wire properly takes a considerable amount of force. You could just use a small flat-blade screwdriver, but you would probably break the wire or not be able to make the proper connection at all.
The punchdown tool helps you in applying the right amount of force in the right direction. Different blades are used depending on whether you are terminating 110-blocks or 66-blocks. Though the blades for each type are pretty different, most punch down tools on the market today can accept both types.
As you punch in with the tool, you load up a spring that then releases the proper amount of force to press the wire firmly into the connector while stripping the insulation off the side of the wire to assure a firm connection.
FiberStore offers Fiber Cable Slitter and Crimping Tool. Check it out today!
Article Source: http://www.fiber-optical-networking-products.com/

2012年5月3日星期四

Fiber Optic Tool

When you use optical cable, you may need some tools that will support you in dealing the work. There are various types of fiber optic tool being used in the fiber optic installation and maintenance works. Fiberstore provide a wide range of hand fiber optic tools and tool kits. These tools and the work of the fiber, so they should provide support for people who work as the installation or repair work. Here are introduce several Fiber Optics.
First, Network Cable Tester is a kind of convenient and comprehensive tool for network professionals, they are always being used to test LAN Datacom and Telecom cables. It find all problems associated with testing such faults as opens, shorts, cable integrity and it also find cable length of individual cables or distance to a fault, and its powerful and user-friendly features enable network installers to accurately check pin configurations of various voice and data communication cables.
The second tool is Telephone Line Tester. Telephone Line Tester is a new kind of line fault tester with safety & multi-functions capabilities. Besides the functions as a common Tel Line Tester, it also has the functions of high voltage protection and dangerous voltage warning.A phone line tester is used for detecting either digital or analog phone systems as well as the line polarity. Telephone line testers are good for both personal and professional use. Fiberstore supply some mini phone line tester,and other Telephone line tester.
Crimping Tool will be the third important thing you need to provide. Fiber optic crimp tool is a tool designed to crimp or connect a connector to the end of a cable. For example, network cables and phone cables are created using a crimping tool to connect the RJ-45 and RJ-11 connectors to the end of the cable. It can bend, cut, strip and crimp insulated wiring in a snap. For cable and phone installation specialists, a handy crimp tool can cut and strip electrical wiring in a few seconds. FiberStore supplies a wide variety of specialized crimping tools which are all at a very competitive price to help you get the job done right.
Other miscellaneous tools are razor. This is a very handy tool when you need to be stripped from the wire insulation. Then you might also need the fiber cutting machine, because some type of cable contains glass or plastic wire instead of metal one.
You have to pay attention to electrical work, including fiber optic, and sometimes it is very dangerous. Therefore, the provision of supporting tools to help you deal with your work is very easy to do is very importmant.
Want to learn more fiber optic products please pay attention to our website:fiberstore.com